Float Equipment

Well Secure has dedicated plant for manufacturing Casing Centralizer, Float equipment Reamer shoes and Cementing Plugs Well Secure is also able to manufacture all range of Float equipments, Reamer Shoes, Cement plugs etc. Well Secure is able to manufacture 9000 Floats from 3 ½” to 13 3/8” and 6000 Float equipment of sizes above 13 3 /8” to 30”. Well Secure has its own threading facilities, Cement mixture, Valve ressure Test facility and has its own tested valve design.

Available in all 3 1/2″; to 30″ sizes and any special size/configuration as per requirement.
• Available with cement nose, aluminum nose or bladed nose.
• API standard threads are cut in-house as are numerous selected premium threads up to certain sizes.
• Other premium and custom threading can be supplied and cut through our extensive vendor base.

  • Available in all 3 1/2″ to 30″ sizes and any special size/configuration as per requirement.
  • Available with cement nose, aluminum nose or bladed nose.
  • API standard threads are cut in-house as are numerous selected premium threads up to certain sizes. Other premium and custom threading can be supplied and cut through our extensive vendor base.
  • Free-floating ball abrades
  • Valve parts will not damage PDC bits
  • Fast drill-out & No springs
  • Operator-controlled buoyancy-regulated by filling casing at surface
Float Shoe

Available in all 3 1/2″; to 30″ sizes and any special size/configuration as per requirement.
• Available with cement nose, aluminum nose or bladed nose.
• API standard threads are cut in-house as are numerous selected premium threads up to certain sizes.
• Other premium and custom threading can be supplied and cut through our extensive vendor base.

Float Collar
  • Available in all 3 1/2″ to 30″ sizes and any special size/configuration as per requirement.
  • Available with cement nose, aluminum nose or bladed nose.
  • API standard threads are cut in-house as are numerous selected premium threads up to certain sizes. Other premium and custom threading can be supplied and cut through our extensive vendor base.
  • Free-floating ball abrades
  • Valve parts will not damage PDC bits
  • Fast drill-out & No springs
  • Operator-controlled buoyancy-regulated by filling casing at surface
  • Available from sizes 9⅝”- 30″.
  • Stab-in cement Float Shoes & Collars are also available with Double Valve.
  • API standard threads are cut in-house and premium threads are cut from licenced thread.
  • Improves displacement accuracy – cement mixing, while pumping continues until cement returns to reach the surface
  • Get better cementing quality – reduced cement/mud interface area and high velocity of flow in the drill pipe minimizes cement contamination while the short pumping time eliminates the need for cement retarders
  • Reduces cement volume – conventional displacement requires calculation of excess cement factor, whereas with Stab-in methods excess cement needs to be not greater than the volume of the drill pipe. No large plugs are needed.
  • Reduces rig time – circulating, pumping, and drill-out time is minimized.
  • Available in sizes 9⅝”- 30″ or other special combinations as per requirements.
  • Reamer Cement Float Shoes are also available with Double Valve.
  • API standard threads are cut in-house. Other premium and custom threading can be supplied and cut through our extensive vendor base
  • Equipped with a Cut-Rite carbide cutting material structure to help eliminate any obstructions and to keep from having to pull the casing to make another wiper run by assuring near gauge hole when running casing.
  • A tapered composite nose is standard with high-port up jet and down-jet nose options to help Jet away filter cake and low side debris in horizontal and deviated well-bores.
  • For use with and without rotation.
  • Specially built to fit any casing and hole size combinations.
  • Reamer shoes are equipped with a standard enclosed down-jet nose with an aggressive cutting structure.
  • PDC drillable Compatible with all casing and liner hanger assemblies. Supplied in casing grade as per requirement
Stab In Float Shoe And Collar
  • Available from sizes 9⅝”- 30″.
  • Stab-in cement Float Shoes & Collars are also available with Double Valve.
  • API standard threads are cut in-house and premium threads are cut from licenced thread.
  • Improves displacement accuracy – cement mixing, while pumping continues until cement returns to reach the surface
  • Get better cementing quality – reduced cement/mud interface area and high velocity of flow in the drill pipe minimizes cement contamination while the short pumping time eliminates the need for cement retarders
  • Reduces cement volume – conventional displacement requires calculation of excess cement factor, whereas with Stab-in methods excess cement needs to be not greater than the volume of the drill pipe. No large plugs are needed.
  • Reduces rig time – circulating, pumping, and drill-out time is minimized.
Reamer Shoe
  • Available in sizes 9⅝”- 30″ or other special combinations as per requirements.
  • Reamer Cement Float Shoes are also available with Double Valve.
  • API standard threads are cut in-house. Other premium and custom threading can be supplied and cut through our extensive vendor base
  • Equipped with a Cut-Rite carbide cutting material structure to help eliminate any obstructions and to keep from having to pull the casing to make another wiper run by assuring near gauge hole when running casing.
  • A tapered composite nose is standard with high-port up jet and down-jet nose options to help Jet away filter cake and low side debris in horizontal and deviated well-bores.
  • For use with and without rotation.
  • Specially built to fit any casing and hole size combinations.
  • Reamer shoes are equipped with a standard enclosed down-jet nose with an aggressive cutting structure.
  • PDC drillable Compatible with all casing and liner hanger assemblies. Supplied in casing grade as per requirement
  • The Conventional Cementing plugs are available in sizes 4 1/2″ to 20″.
  • Options available in Conventional Top Cementing Plug & Conventional Bottom Cementing Plug as per requirement. Plug is also available and can be drilled out with PDC and conventional drill bit
  • The Top & Bottom Plug are constructed of material selected to reduce the drill out time.
  • The Top Plug is used as a follow plug to displace the cement and land on the upper end of the Bottom Plug.
  • The body consists of ebonite insert molded with elastomer.
  • This allows the drill bit to fracture the ebonite rather than tear the rubber and aluminium as with a conventional Plug thus reducing the drill out time significantly.
  • No metal parts are used therefore the Plugs are PDC drillable.
  • The Conventional Cementing plugs are available in sizes 4 1/2″ to 20″.
  • Options available in Conventional Bottom Cementing Plug as per requirement.
  • Plug is also available and can be drilled out with PDC and conventional drill bit
  • Wellsecure Conventional Cementing plugs are available in NR, SBR,NBR and HNBR grades Bottom Plug are constructed of material selected to reduce the drill out time, there-by resulting in cost saving.
  • No metal parts are used therefore the Plugs are PDC drillable.
Top Cement Plug
  • The Conventional Cementing plugs are available in sizes 4 1/2″ to 20″.
  • Options available in Conventional Top Cementing Plug & Conventional Bottom Cementing Plug as per requirement. Plug is also available and can be drilled out with PDC and conventional drill bit
  • The Top & Bottom Plug are constructed of material selected to reduce the drill out time.
  • The Top Plug is used as a follow plug to displace the cement and land on the upper end of the Bottom Plug.
  • The body consists of ebonite insert molded with elastomer.
  • This allows the drill bit to fracture the ebonite rather than tear the rubber and aluminium as with a conventional Plug thus reducing the drill out time significantly.
  • No metal parts are used therefore the Plugs are PDC drillable.
Bottom Cement Plug
  • The Conventional Cementing plugs are available in sizes 4 1/2″ to 20″.
  • Options available in Conventional Bottom Cementing Plug as per requirement.
  • Plug is also available and can be drilled out with PDC and conventional drill bit
  • Wellsecure Conventional Cementing plugs are available in NR, SBR,NBR and HNBR grades Bottom Plug are constructed of material selected to reduce the drill out time, there-by resulting in cost saving.
  • No metal parts are used therefore the Plugs are PDC drillable.
Translate »